Canon PIXMA MX300 Driver Download

Posted on

Canon PIXMA MX300 Driver Download

Canon Pixma MX300
Canon Pixma MX300

Canon PIXMA MX300 Driver Download – The Pixma MX300 is Canon’s entry-level, office-oriented all-in-one inkjet offering. it offseted it with top quality prints and scans. It’s not network-ready, so if you remain in a multiperson office, it’s not your best bet, as well as it lacks an automated file feeder (ADF), which indicates set scans, duplicates, as well as faxes will be laborious. If you require an ADF, take a look at the Lexmark X5470, and also if you should have a network-ready all-in-one, the Lexmark X4550 fits the expense. Both Lexmark devices will certainly also obtain you quicker print speeds (except with images), however the Canon MX300 beats the pants off both when it involves print high quality.

Canon Pixma MX300 ; Design

The Canon Pixma MX300 is rather big for a low-cost all-in-one. It sits 18.4 inches vast, 17.3 inches deep, and 6.9 inches tall, yet considers a light 15.5 extra pounds. The light-gray-and-black unit does not have an automated paper feeder, which is unusual for office-oriented multifunctions, yet not surprising offered its low cost. It’s the only one of Canon’s workplace all-in-ones that doesn’t provide an ADF. The scanner cover hides an A4 dimension scanner, and without an ADF, A4 is the largest dimension original you could check. This printer does not have sd card slots, yet does provide a PictBridge-enabled USB port for PictBridge-compliant video cameras, cameras, and camera phones.

The paper handling is straightforward and simple. A paper input assistance unfolds from the top-rear side of the printer as well as stands up to 100 sheets of simple paper. A flap folds out from the printer’s front panel to serve as the outcome tray.

The control panel is tidy and simple. A two-line text LCD is the center factor of the control board, but it’s not backlit, which indicates it’s tough to check out in low light. Three activity buttons allow you switch over between duplicate, fax, as well as check activities. A menu button and also menu navigation buttons let you browse your choices. Two switches are committed to changing duplicate setups and also fax quality. An alphanumeric keypad and beginning as well as stop/reset switches round out the panel.


The Canon Pixma MX300 provides just a USB connection, so it’s perfect for single-user workplaces. It works with both Macs and Windows Computers, nonetheless. The task alternatives on this multifunction printer are common for a design at this rate factor. When duplicating, you can reduce/enlarge between 25 percent and 400 percent. Special copy choices include sticker copy, picture repeat, 2-on-1 as well as 4-on-1, borderless, and also structure remove copy. Structure remove uses in scenarios where the product being replicated is smaller than the designated paper (a publication, for example). Rather than publishing the extra location as black, the printer ignores it, therefore stopping the waste of black ink.

The walk-up check capacities on this printer are missing. Although the control panel offers a check job button, once you push Start, the printer causes the MP Navigator EX software application to launch on your PC. You’ll have to click the Check switch in the software program to in fact start the check. Nonetheless, the MP Navigator Ex Lover is an easy-to-use program that allows you alter scan resolution, specify the type of paper you’re scanning (photo, record, journal, and so on), and afterwards make edits to the resulting scan. Save As options consist of JPEG, TIFF, BMP, and also PDF, as well as you could select where to conserve the data. The program additionally lets you connect the checked data to an email. The one check function the MX300 lacks is the ability to scan straight into a software application such as Paint or Word. You’ll need to check, conserve, then by hand open up the report in the program you want to use.

Although the MX300 does not have one-touch speed dials, you can register approximately 20 commonly called fax numbers with two-digit coded speed dials. If you can’t keep an eye on all 20 numbers in your head, the MX300 will certainly allow you print a listing of the licensed numbers. You cannot send out fax blasts or timetable delayed faxes on this unit– not surprising for an entry-level multifunction. You can, nonetheless, receive faxes right into memory (i.e., store as opposed to print) if you disable the automobile print options, or if the printer is out of ink, the paper tray is vacant or has the incorrect paper in it, or if the output tray is shut. The control board will certainly show that you have stored faxes in memory, as well as you can either publish them or print a listing of the saved faxes.

The front-mounted USB port allows you print imagines directly from PictBridge electronic cameras, however as this is an office-oriented equipment, we would love to see support for storage devices such as USB thumbdrives.


In CNET Labs’ examinations, the Canon Pixma MX300 was a middle-of-the-pack entertainer amongst comparably valued workplace all-in-ones, with the exception of image printing. It racked up 6.32 web pages per minute with text printing, behind 2 Lexmark models: the X5470 and the X4550. When publishing shade graphics, it racked up 1.45 web pages each minute, right between both Lexmarks. It surprised the competition, however, when printing 4×6 photos, with a rating of 1.06 web pages per min, doubling the performance of the next fastest. With scans, it was once more between: 4.50 pages each minute for grayscale and also 4.42 web pages each minute for shade.

Compatibility – Operating System (OS)

Windows 10 / Windows 10 (x64) / Windows 8.1 / Windows 8.1 (x64) / Windows 8 / Windows 8 (x64) / Windows 7 / Windows 7 (x64) / Windows Vista / Windows Vista (x64) / Windows XP / Mac OS X v10.10 OS X v10.10 / Mac OS X v10.9 / Mac OS X v10.8 / Mac OS X v10.7 / Mac OS X v10.6 / Mac OS X v10.5

Canon Pixma MX300 Driver Download

Download : Canon Pixma MX300 Driver for Windows (32bit)

Download : Canon Pixma MX300 Driver for Windows (64bit)

Download : Canon Pixma MX300 Driver for Win XP (64bit)

Download : Canon Pixma MX300 Printer Driver for Mac OS

Download : Canon Pixma MX300 Scanner Driver for Mac OS

Download : Canon Pixma MX300 Driver for Linux

How to install driver for Windows on your computer or laptop :

The steps to install the software and driver for Canon PIXMA MX300 Series :
  1. After the download is complete and you are ready to install the file, click Open the Folder, and then click the files that you have downloaded. The file name ends in .exe.
  2. You can also accept the default location to save the file. Click Next, and please wait while the installer. extracts the files to prepare the installation on your computer or laptop.
  3. When the Install Wizard starts, follow the on-screen instructions to install the software.
  4. When finished restart your computer or laptop Then do a test print and scan tests.
  5.  If the test print and scan it there is no problem, then we have successfully installed the driver.

Prior to set up Canon PIXMA MX300 Driver , you must test the specifications of the device used which encompass the form of printer and working device used on desktops and laptops, if there may be any question please Contact Us.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.